1910 - 09 - ALESA toolholder SC 09 for turning
Individually adaptableCCFT 09 / 12 -16
Specifications
Part No | Type (model) | h2 mm | b mm | l1 mm | h1 mm | f mm | l2 mm | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
19100240 | SCLCR 12 12 09 | 12 | 12 | 80 | 12 | 16 | 15 | r | CCFT 09 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
19100245 | SCLCL 12 12 09 | 12 | 12 | 80 | 12 | 16 | 15 | l | CCFT 09 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
19100260 | SCLCR 16 16 09 | 16 | 16 | 100 | 16 | 20 | 15 | r | CCFT 09 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
19100265 | SCLCL 16 16 09 | 16 | 16 | 100 | 16 | 20 | 15 | l | CCFT 09 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
Tool will be delivered with holder, all screws but without indexable inserts.
Indexable inserts
The following inserts are suitable with the selected tool. If you are unsure or have any questions, we look forward to advising you.
Cutting material | Coating | Part No | ISO Code | Type G/K | Detail X | Materialklasse | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1
|
2
|
3
|
4
| |||||||||||
HSS-E | TiN | 15780350 | CCFT 09 T3 02 FR | G | 25° | R 0.2 | r | |||||||
HSS-E | TiN | 15780352 | CCFT 09 T3 02 FL | G | 25° | R 0.2 | l | |||||||
HSS-E | TiN | 15780355 | CCFT 09 T3 04 FR | G | 25° | R 0.4 | r | |||||||
HSS-E | TiN | 15780357 | CCFT 09 T3 04 FL | G | 25° | R 0.4 | l | |||||||
HSS-E | TiN | 15780360 | CCFT 09 T3 08 FR | G | 25° | R 0.8 | r | |||||||
HSS-E | TiN | 15780362 | CCFT 09 T3 08 FL | G | 25° | R 0.8 | l | |||||||
HSS-E | TiN | 15780855 | CCFT 09 T3 04 FR | K | 30° | R 0.4 | r | |||||||
HSS-E | TiN | 15780857 | CCFT 09 T3 04 FL | K | 30° | R 0.4 | l | |||||||
HSS-E | TiN | 15780860 | CCFT 09 T3 08 FR | K | 30° | R 0.8 | r | |||||||
HSS-E | TiN | 15780862 | CCFT 09 T3 08 FL | K | 30° | R 0.8 | l | |||||||
Technical information
Turning
Profile turning
The classical finishing tool.
Good cooling increases tool life.
Indexable insert type K for a controlled chip or as chip-breaker.
The highly positive cutting geometries reduce the cutting forces considerably.