1910 - 06 - ALESA toolholder SC 06 for turning
Individually adaptableCCFT 06 / 08 - 10
Specifications
Part No | Type (model) | h2 mm | b mm | l1 mm | h1 mm | f mm | l2 mm | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
19100200 | SCLCR 08 08 06 | 8 | 8 | 60 | 8 | 10 | 9 | r | CCFT 06 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
19100205 | SCLCL 08 08 06 | 8 | 8 | 60 | 8 | 10 | 9 | l | CCFT 06 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
19100220 | SCLCR 10 10 06 | 10 | 10 | 70 | 10 | 12 | 9 | r | CCFT 06 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
19100225 | SCLCL 10 10 06 | 10 | 10 | 70 | 10 | 12 | 9 | l | CCFT 06 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
Tool will be delivered with holder, all screws but without indexable inserts.
Indexable inserts
The following inserts are suitable with the selected tool. If you are unsure or have any questions, we look forward to advising you.
Cutting material | Coating | Part No | ISO Code | Type G/K | Detail X | Materialklasse | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1
|
2
|
3
|
4
| |||||||||||
HSS-E | TiN | 15780245 | CCFT 06 02 01 FR | G | 20° | R 0.1 | r | |||||||
HSS-E | TiN | 15780247 | CCFT 06 02 01 FL | G | 20° | R 0.1 | l | |||||||
HSS-E | TiN | 15780250 | CCFT 06 02 02 FR | G | 20° | R 0.2 | r | |||||||
HSS-E | TiN | 15780252 | CCFT 06 02 02 FL | G | 20° | R 0.2 | l | |||||||
HSS-E | TiN | 15780255 | CCFT 06 02 04 FR | G | 20° | R 0.4 | r | |||||||
HSS-E | TiN | 15780257 | CCFT 06 02 04 FL | G | 20° | R 0.4 | l | |||||||
HSS-E | TiN | 15780750 | CCFT 06 02 02 FR | K | 30° | R 0.2 | r | |||||||
HSS-E | TiN | 15780752 | CCFT 06 02 02 FL | K | 30° | R 0.2 | l | |||||||
HSS-E | TiN | 15780755 | CCFT 06 02 04 FR | K | 30° | R 0.4 | r | |||||||
HSS-E | TiN | 15780757 | CCFT 06 02 04 FL | K | 30° | R 0.4 | l | |||||||
Technical information
Turning
Turning a shoulder
Profile turning
The classical finishing tool.
Good cooling increases tool life.
Indexable insert type K for a controlled chip or as chip-breaker.
The highly positive cutting geometries reduce the cutting forces considerably.